Click To Call(689) 329-1673Click To Get A Free Estimate
Honed beige travertine lanai floor beside a screened pool, sealed and dry in soft afternoon light

Natural stone that keeps its warm color

Travertine Sealing in St. Cloud, FL

Call (689) 329-1673 for a free estimate to clean and seal travertine on your lanai or pool deck.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 329-1673
Travertine sealing

Can I get travertine sealed in St. Cloud, and how soon will someone call?

Yes, a local contractor cleans and seals travertine at St. Cloud, FL homes, and a reply to your request comes within 1 business day, often well before that. The estimate is free, and you can say no after hearing the price. To start, call (689) 329-1673.

Travertine is full of tiny holes, so a spilled drink, a wet towel or a splash of pool water can leave a mark that stays. A clean, a stone-safe sealer and fresh joint material turn a blotchy lanai back into one even, warm surface that wipes down in minutes. Tell the contractor which areas get the most use when you send the free estimate form.

Call (689) 329-1673

Stone sealer

Why does travertine need a different sealer than concrete pavers?

Travertine is natural stone, and it takes in liquid like a sponge. Castle Clean and Seal says its pores soak up water, dirt, pool chemicals and mold spores, which is why the stone needs a coat that sits inside it. Kennelly Paver and Restoration says stone needs an impregnating sealer, a clear, non-film-forming barrier that repels water and oil without changing how the stone looks. To hear which product a contractor would use, call (689) 329-1673.

A film coat can go wrong on stone

Kennelly warns that a topical film on natural stone can leave it slippery or peeling, and Castle says solvent-based coats can trap Florida moisture and turn white. A breathable water-based product lets vapor escape. Ask for the product name and the data sheet when you send the free estimate form.

Natural stone is a softer surface

Castle says too much pressure can etch travertine, so the wash is gentle and wide, not a hard blast. A scarred face holds dirt and stains faster than a smooth one. Ask what pressure and nozzle the contractor plans to use, and call (689) 329-1673 if the answer is vague.

Travertine pool surround with a screen cage and a clear sealed finish after rain
How it works

What is the travertine sealing process, step by step?

A standard visit runs in one day, and Castle Clean and Seal says its crews can usually clean and seal travertine in that time because its water-based product can go on a slightly damp surface. Every job follows the same order of work. To get on a calendar, call (689) 329-1673.

1. Inspect the stone

The contractor walks the lanai, notes etched spots, cracked pieces, empty joints and any old coating, then measures the area.

2. Treat what grows

Algae and mold under the screen cage get a treatment first, since growth that is only rinsed off comes back from the roots.

3. Gentle wash

A high-volume, low-pressure wash lifts pool chemical film and dirt without scarring the face.

4. Fill the joints

Joint sand is worked in after the stone dries, so the pieces stay tight and weeds have little room.

5. Seal and walk it

The stone sealer goes on in thin, even coats and gets rolled by hand near the water. The contractor then gives the stay-off times.

Pricing

What does travertine sealing cost in St. Cloud?

Published stone rates run $1.75 to $3.00 per square foot at Castle Clean and Seal and $2.00 to $3.50 at Kennelly Paver and Restoration. That is higher than the $1.50 to $3.00 this site shows for concrete pavers, because stone needs a specialized sealer and a gentler wash. The table below applies both ranges to common spots. For a price on your own stone, send the free estimate form.

Stone areaTypical exampleAt $2.00 to $3.50 (Kennelly)At $1.75 to $3.00 (Castle)
250 sq ftFront walk and entry$500 to $875$438 to $750
400 sq ftScreened lanai floor$800 to $1,400$700 to $1,200
600 sq ftPool deck$1,200 to $2,100$1,050 to $1,800
1,000 sq ftLanai, deck and patio together$2,000 to $3,500$1,750 to $3,000

Kennelly Paver and Restoration lists natural stone sealing such as travertine at $2.00 to $3.50 per square foot with specialized cleaning and an impregnating sealer. Castle Clean and Seal lists pool deck and travertine sealing at $1.75 to $3.00. Both are Central Florida companies, and neither names St. Cloud, so treat the figures as a planning range. Castle also says each of its projects has a $1,000 minimum, which can lift a small job above the table. Your own quote may differ.

Three things move the number: the size of the area, how much growth or staining there is, and whether an old coat has to be removed first. Kennelly says heavy staining and years of neglect add labor in the cleaning stage. Castle says stripping can add $500 to $1,000 or more. A quote that does not name the stone sealer deserves a follow-up, so call (689) 329-1673 and ask.

Get a Free Estimate

Can a sealed travertine pool deck stay slip resistant?

Yes, when the product and finish are chosen for wet feet. Castle recommends non-slip sealer additives around travertine pool areas, and Kennelly offers a natural matte or a semi-gloss finish. Matte reads a little flatter, and it grips better when the deck is wet. Ask for a small test patch near the steps, and call (689) 329-1673 to set up the look.

How often does travertine need resealing in Florida humidity?

Castle says most outdoor travertine in Florida should be resealed every 2 to 3 years, with pool decks nearer 2. St. Cloud has a humid subtropical climate, according to Wikipedia, with hot, humid summers, so shaded spots stay damp longer. Water that soaks in and darkens the stone, instead of beading, tells you the sealer is wearing thin. To book a check, call (689) 329-1673.

Newer homes, newer stone

St. Cloud had 8,602 housing units in 2000, 14,544 in 2010 and 21,347 in 2020, according to Wikipedia, so some stone here may be new. Ask the contractor how long new stone should wait before its first coat, and mention the install date when you send the free estimate form.

Stains and marks

Which marks and stains show up on travertine at a lanai?

Castle says grease, spilled drinks, leaves and planter stains soak into open stone fast, and that shade and humidity under a screen cage breed mold and mildew. Pool chemical film builds up near the water. Sealing helps liquids bead so they wipe away before they set. To go through the marks on your stone, call (689) 329-1673.

Etch marks are not stains

A dull, pale spot where something acidic sat is an etch in the surface, and sealer does not cover it. Orlando Stone Works lists honing, polishing and grinding for etch removal as a separate stone-care service. Ask whether the contractor handles repairs, and point out the spots when you send the free estimate form.

Grout lines and joints

Orlando Stone Works also cleans and seals grout lines, and Kennelly says a sealer that also stabilizes sand helps in wet weather. Either way, empty joints invite weeds and shifting. Mention loose or sunken pieces on the call to (689) 329-1673.

Should my homeowners association know before a travertine finish changes?

Check your rules before any finish change. Harmony, a master-planned community near St. Cloud, has a Residential Owners Association created on October 8, 2002, according to Wikipedia, and associations like it often review exterior work. A natural or matte look is the closest to unsealed stone, which can make approval easier. To talk through finishes, send the free estimate form.

Service area

Which towns near St. Cloud can book travertine sealing?

A contractor who covers St. Cloud also works across the Osceola County line and into nearby Orange and Polk County communities. Each town below has its own page with local notes. If your street is not listed, call (689) 329-1673.

Contractor kneeling beside a stone lanai floor while a homeowner points to a pale patch
Photos

What does sealed travertine look like at homes around St. Cloud?

Wide sealed gray and tan paver driveway with homeowners beside a lakeside street on a St. Cloud lanai
Family on lounge chairs by a sealed paver pool deck inside a screened lanai on a St. Cloud lanai
Sealed herringbone paver walkway leading to an arched front door on a St. Cloud lanai
Sealed paver patio with a dining table at golden hour beside a cypress-lined lake on a St. Cloud lanai
Close view of sealed travertine pavers with clean joints on a St. Cloud lanai
Shaded paver patio with one cleaned half beside a mossy half on a St. Cloud lanai
Contractor running a surface cleaner over a brick paver driveway on a St. Cloud lanai
Two contractors spraying and rolling sealer on a paver driveway on a St. Cloud lanai
Why choose us

Why hire a local contractor for travertine sealing in St. Cloud?

A local contractor knows the afternoon storms, the damp shade under screen cages and the lake humidity that St. Cloud gets, since East Lake Tohopekaliga covers 11,968 acres just north of town, according to Wikipedia. Stone needs a different plan than concrete, and the quote should say so. To start, call (689) 329-1673.

Contractors who work in Osceola County

A company that covers St. Cloud already plans around the afternoon storms, the summer sun and the watering schedule. That makes the first visit more useful.

Free to ask

There is no charge for the look or the quote. Turn the price down and nothing more happens.

A range you can check

Central Florida paver companies publish $1.50 to $3.00 per square foot to clean, sand and seal, and this site shows the same range. A quote far outside that range is worth asking about.

You decide when

Ask for the price in writing and decide when you are ready. Read the contractor standards page for the points worth confirming first.

Questions

Frequently asked questions about travertine sealing in St. Cloud

Is it necessary to seal pavers in Florida?

Concrete pavers can work without it, but travertine is a different case. Kennelly Paver and Restoration calls travertine porous, which means spills and moisture can soak in and leave stains. Castle Clean and Seal says unsealed outdoor travertine turns gray, grows algae in the shade and loses joint sand. For stone, sealing is the usual step.

How much does it cost to have tile professionally cleaned?

For outdoor travertine, the published pieces are a clean and seal at $2.00 to $3.50 per square foot from Kennelly Paver and Restoration and $1.75 to $3.00 from Castle Clean and Seal. Cleaning alone costs less, and neither company lists a stand-alone tile cleaning rate. A 400 square foot lanai comes to about $700 to $1,400 across those ranges.

How much does it cost to seal travertine pavers?

Kennelly Paver and Restoration puts natural stone sealing at $2.00 to $3.50 per square foot, and Castle Clean and Seal puts pool deck and travertine work at $1.75 to $3.00. A 600 square foot pool deck lands between about $1,050 and $2,100. A failed old coat that needs stripping adds to that.

What is the average cost to seal pavers in Florida?

For concrete and brick pavers in Central Florida, companies publish $1.50 to $3.00 per square foot to clean, sand and seal. Travertine runs a little higher because it needs a stone sealer and gentler cleaning. This site uses the same $1.50 to $3.00 range for St. Cloud pavers.

What do professionals use to seal pavers?

On travertine, Kennelly Paver and Restoration describes a specialized impregnating sealer, a clear coat that sinks in instead of forming a film. Castle Clean and Seal uses a breathable water-based sealer made for humid climates. Ask any contractor for the product name and its data sheet before the day of the job.

How often should travertine at a St. Cloud home be resealed?

Castle Clean and Seal says most outdoor travertine in Florida needs resealing every 2 to 3 years, with pool decks closer to 2 because they get more water, sun and foot traffic. A shaded lanai under a screen cage may tell you sooner, since water that soaks in instead of beading is the usual sign.

Can travertine around a pool be sealed without sealer reaching the water?

Yes, with care at the edge. Castle Clean and Seal says it rolls sealer on by hand at the coping so none goes in the pool, and it suggests asking your pool company to vacuum afterward, since sand or debris can reach the water. Ask your contractor how the pool edge is handled.

How long before I can walk on sealed travertine and move the furniture back?

Castle Clean and Seal says travertine is denser than concrete pavers, so sealer takes a little longer to cure. It advises staying off for about 24 hours and waiting 48 hours before furniture goes back. Your contractor will give the times for the product used.

Will sealing make my travertine slippery?

It can if the wrong product goes down or too much is applied. Kennelly Paver and Restoration warns that a film-forming sealer on natural stone can cause slipperiness and peeling, and Castle Clean and Seal recommends a non-slip additive around travertine pool areas. Ask for a matte or natural finish and a grip additive on wet areas.

Can etched or chipped travertine be fixed before it is sealed?

Often, yes. Orlando Stone Works lists honing, polishing, grinding for etch removal and hole and crack repair next to sealing. Those are stone-care trades, so ask whether the contractor handles repairs or sends the stone to a specialist before the sealer goes on.

Should my homeowners association hear about a new travertine finish?

Check your rules first. Harmony, a master-planned community near St. Cloud, has a Residential Owners Association created in 2002, and associations like it often review exterior changes. A matte or natural finish usually leaves the stone looking as it did, but a written finish choice from the contractor helps if the board asks.

Get a free estimate on your St. Cloud travertine

Send the short form or call, and a contractor replies within 1 business day, often much sooner.

Call (689) 329-1673

Free, no obligation