
Paver sealing for Lancaster Park homes
Paver Sealing in Lancaster Park, FL
From Al Coith Park to East Gore Street, Lancaster Park pavers get a free sealing estimate when you call (689) 329-1673.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Lancaster Park
Paver sealing in Lancaster Park comes with a free estimate from a local contractor who washes, re-sands and seals driveways, walks and patios. A call to (689) 329-1673 or a short request gets a reply inside 1 business day, usually much sooner. The work reaches homes from the streets near Al Coith Park to those off East Gore Street, and it covers single-family lots and multi-family buildings alike.
Picture a driveway that has faded to a flat gray, with weeds in the seams and a dark patch under a tree. After a wash, fresh sand and a new coat, the color comes back and the joints look tidy. That change shows from the curb, and it holds as long as the coat does. Describe your pavers and you can send the free estimate form, with no obligation.

Why hire a local paver sealing contractor in Lancaster Park?
Lancaster Park homes tend to be valued well above the national median, so owners care how the work is done and who does it. A local contractor can walk your lot, explain the steps and give a price, so send the free estimate form and ask.
Free look, then a price
A contractor looks at your Lancaster Park pavers at no charge, from the apron to the back patio, and gives you a price before you agree to a thing.
A fair range to check
Regional companies commonly list $1.50 to $3.00 per square foot for the full wash, sand and seal. Compare your bid to that.
Finish that fits the house
Matte lasts longer between coats, while wet look deepens color and wears faster. You pick the look for your Lancaster Park home.
You decide, no obligation
Date, finish and whether to go ahead are your calls. A Lancaster Park estimate carries no obligation.
Get Your Free Estimate in Lancaster Park
Tell us about your pavers in Lancaster Park.
Free, no obligation

What paver problems show up most in Lancaster Park?
Shade that grows mold on older lots
Shaded patios under a tree or cover grow more mold and algae, one Central Florida company says. A Lancaster Park walk or back patio under a tree can turn dark long before the sunny driveway does. Those spots need extra washing, which means an extra step in the quote, and the contractor should say so before starting.
Joint sand that rain takes away
An Orlando paver company says eroded sand washes out in heavy rain and treats re-sanding as a required part of a real quote. Open joints give weeds a place to start. A wash pulls out more, so new sand goes in before any coat. Ask how much sand the contractor plans to use.
A cheap coat that gives out early
One Central Florida company says cheap no-name sealers reportedly break down in 6 to 12 months under UV. Another says cheap quotes often skip prep or joint sand. On a home valued as highly as many in this ZIP, a coat that fails in a year is a poor trade. Ask to see the product name and the number of coats on paper.
An old solvent coat that must come off
Old low-quality solvent-based sealer often has to be stripped before new sealer bonds, one company says. Solvent-based and water-based coats do not stack. If you bought the home with the pavers already coated, the contractor has to find out what is on them. A coat that bonds poorly can peel in sheets within a season.
Scuffs on a glossy finish
An Orlando company says high-gloss finishes generally wear faster than matte. A drive that sees daily tires shows that first. If you like the glossy look, expect a shorter span before the next coat and plan the budget for it. Matte hides wear better. Pick the finish with the next coat in mind.
Is paver sealing worth the money in Lancaster Park?
It is a maintenance cost, and the numbers around it are worth a look. The median home value in ZIP 32806, which holds Lancaster Park, was $441,300 in 2024, up from $246,100 in 2011. The ZIP page lists the national figure as $332,700. Regional companies commonly list $1.50 to $3.00 per square foot for the full wash, sand and seal, so you can send the free estimate form and see how your area prices out.
The ZIP counted 12,589 homes, with 9,167 single-family and 3,397 multi-family. Of occupied homes, 47.12 percent were owned with a mortgage, 22.42 percent owned free and clear and 30.46 percent rented. Those mixes mean different people sign off on work in different places. If you manage a rental or an owner-occupied lot, say who approves work when you call (689) 329-1673.
Sealing does not fix every problem, and the contractor should say what it will not do. It will not lift a sunken paver or cure a leaning edge, so point those out at the first visit. Ask for the area, the coats and the finish in writing. Then send the free estimate form to compare against another bid.
What does paver sealing cost in Lancaster Park?
Regional companies commonly list $1.50 to $3.00 per square foot for the full wash, sand and seal. Lancaster Park lots vary, so a wide drive with a side walk and a back patio costs more than a short apron. Shade growth and an old coat that must be stripped add to the bill. Send your measurements when you send the free estimate form, and the contractor can price each surface.
Finish plays a part as well, since matte and wet look are priced and wear differently. An Orlando company puts natural finishes at 3 to 5 years and wet look at 2 to 3, so a glossy coat means more future jobs. Call (689) 329-1673 and ask the contractor to write the finish and coats on the quote. Then you can compare two bids on the same terms.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $450 to $900 |
| 600 sq ft | Two car driveway | $900 to $1,800 |
| 1,000 sq ft | Large driveway or pool deck | $1,500 to $3,000 |
| 1,500 sq ft | Driveway plus pool deck | $2,250 to $4,500 |
Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

How does a paver sealing job work in Lancaster Park?
Measure and read the old coat
The contractor walks the drive, walks and patio and measures each. Earlier sealing matters, so the contractor looks for a past coat before choosing a product. Sunken or leaning pavers are noted so they can be fixed first. You get a written area and a written scope. This visit is also the time to point out anything that bothers you.
Wash and treat the shade
Cleaning clears the dark growth from shaded corners and from walks under trees. Rust and oil spots get treated here. If the old coat has failed, a stripping step comes before the wash finishes. Rinse water stays on your lot and off the street.
Put new sand in the joints
Washing and rain pull sand out of the joints, so fresh sand goes back in. One Orlando company hydro-compacts it so it sets firm. That step slows weeds and keeps edges tight. Skipping it is a common way cheap quotes cut cost. Ask how much sand the job will need. Open joints are where weeds and loose edges start, so full joints matter.
Let the surface dry fully
Sealer needs a dry surface, and Florida humidity slows drying in the shade. One Central Florida company notes that damp, shaded or rainy spots take longer to dry before use. The contractor reads the pavers and the forecast and waits if there is doubt. A paver that was wet last night is not ready for sealer by morning.
Coat thinly and agree the keep-off time
Thin coats come first, and one company says two thin ones outperform a single thick coat. The finish is the one you chose. Foot traffic returns in about 24 to 48 hours, one company says, while another says three to four, so ask which applies to your product. A second thin coat adds a little drying time. Keep sprinklers off the fresh coat until the contractor says it has set.
Complete paver services in Lancaster Park
A Lancaster Park job runs in a set order: measure, wash, re-sand, dry, seal. Each step protects the next one, and the coat goes on last so nothing is trapped beneath it. Ask the contractor to list the steps on the quote, with the area for each surface. For a rough timeline on your lot, call (689) 329-1673.
Driveways take tires and sun, walks take foot traffic and shade, and patios take both. Tell the contractor which surface matters most when you send the free estimate form. That helps the contractor plan finish, coats and drying time for each area, so you are not paying for the same coat everywhere. A back patio may need less than a drive.
Matte or wet look is the main choice. An Orlando company says natural finishes last 3 to 5 years and wet look 2 to 3, and that high-gloss wears faster. Water-based and solvent-based sealers also do not mix, so the old coat decides what can go on. Call (689) 329-1673 to talk through the finish for your Lancaster Park home.
Orlando storms and humid air move dates, especially for shaded pavers that stay damp. A careful contractor waits for a dry surface rather than coating on schedule. To pick a date with some room built in, send the free estimate form and ask about the next dry stretch.
Questions to ask before you hire
- Is the estimate a flat price, or does it change if you find more square footage on the day?
- Do you seal the pool deck with a different product than the driveway?
- How many hours of dry weather does the sealer need after the last coat?
- What do you ask me to move or cover before the crew arrives?
- How do you handle the white haze that shows up on some pavers after a wash?
- Can I choose between a matte, satin or gloss finish, and what does each one cost?
- Will you stop at my property line so the neighbor's pavers and my shared walkway stay clean?
What do sealed pavers look like around Lancaster Park?









Why local matters in Lancaster Park
A contractor who works Lancaster Park knows that homes here run from single-family lots to multi-family buildings, and that who signs off varies. That shapes the first conversation, from access to payment. A contractor from far away may skip it. To reach one who works this part of Orlando, call (689) 329-1673.
Local contractors also know the shade. Older streets here carry mature trees, and a walk under one stays damp and grows mold and algae. A contractor who has worked nearby plans for the extra wash and the longer dry time, and says so in the quote. You can send the free estimate form and mention the trees on your lot.
Timing matters because afternoon rain and humidity slow drying. A contractor who works nearby knows to leave margin and to say so before the day, which helps you avoid a rescheduled job. Whichever finish you pick, send the free estimate form and ask for a plan with dry-day backups.
What landmarks help me place my street in Lancaster Park?
Al Coith Park at 901 Delaney Avenue is a good one, with fitness stations and bike and jogging trails open sunrise to sunset. The Lake Como School Playground and Ballfields sit at 2450 East Gore Street, and Boone High is at 1000 East Kaley Street. Blankner K-8 is at 2500 South Mills Avenue. Name the closest one and the contractor can place your street, so call (689) 329-1673 and say which you pass.
Just north, the city's Lake Como Park wraps around the lake at the center of the Lake Como neighborhood, at Lake Como Circle and Bumby Avenue. A lion sculpture went in among the azaleas and oaks in 1985, and a 1993 renovation added walks and footbridges. The ZIP holds 26,582 people, so a landmark helps the contractor place you. When you are ready, send the free estimate form and name one near you.
Frequently Asked Questions
What is the average price for paver sealing in Lancaster Park?
Regional companies commonly list $1.50 to $3.00 per square foot for the full wash, sand and seal. Your Lancaster Park total depends on area, shade growth and whether an old coat must be stripped. The quote should state the measured area so bids line up. Bigger lots can see a lower rate per square foot.
What is the average cost to seal pavers in Lancaster Park?
Plan on $1.50 to $3.00 per square foot, the range companies commonly publish. A wide drive with a walk and patio adds up quickly. Get the area, the coats and the finish written down. Ask which surfaces are priced at which rate.
How often should pavers be sealed in Lancaster Park?
Natural finishes are redone every 3 to 5 years and wet look every 2 to 3, one Orlando company says. Shade and daily tires push toward the short end. A water test helps: water that beads means the coat is still working. Pool decks and busy drives often sit at the short end.
Is it better to spray or roll paver sealer in Lancaster Park?
Many companies do both. One Orlando company says sealer goes on in thin coats with low-pressure sprayers and is back-rolled, and says two thin coats beat one thick one. Ask the contractor how the coat will be applied. Either way, thin coats matter more than the tool.
What happens if pavers are not sealed in Lancaster Park?
They lack the water, oil and stain protection a coat adds, and UV fades them faster. Heavy rain also carries joint sand away. Sealing slows these changes but does not fix sunken pavers or deep stains. Ask the contractor what the coat will and will not cover.
Does a cheap paver sealing quote cost more later?
It can. One Central Florida company says cheap no-name sealers reportedly break down in 6 to 12 months under UV, and another says cheap quotes often skip prep or joint sand. Ask what product, how many coats and what prep the price includes. A written scope settles most of that.
Can new sealer go over an old coat on my Lancaster Park pavers?
Not always. A water-based product cannot go over a solvent-based one, and old low-quality solvent sealer often has to be stripped first. The contractor has to identify what is on your pavers before choosing.
How long until I can walk on sealed pavers in Lancaster Park?
It depends on the product. One Orlando company says feet are fine in about 24 to 48 hours, while another says three to four hours. Damp shade can add time. Ask for the product's own times. Rain in the first day can also change the plan.
Is sealing pavers a good idea in Lancaster Park?
Usually yes, because a coat repels water, oil and stains and slows UV fading. It matters most on shaded walks that grow mold and on drives that take daily tires. It will not repair sunken pavers, so ask the contractor what the job leaves out.
What do professionals use to seal pavers in Lancaster Park?
Professionals use water-based or solvent-based sealers, in matte or wet look finishes. One Orlando company names urethane products and says they penetrate the surface. Ask the contractor for the product name and keep it, since the next coat depends on what is on now.
Who approves paver work on a rented Lancaster Park home?
The owner does, and sometimes a property manager or association has a say too. About 30 percent of occupied homes in this ZIP are rented. If you manage a rental, give the contractor the owner's name and the access plan up front.
Does sealing help weeds in Lancaster Park pavers?
Mostly through the joints. One Orlando company says hydro-compacted sand slows algae and weed growth. Washing removes old sand, so fresh sand goes in before the coat. Sealing alone will not stop weeds if the joints stay open.
Nearby areas we serve
Ready for a Free Estimate in Lancaster Park?
Call (689) 329-1673 and tell us about your pavers.
Free, no obligation
