Click To Call(689) 329-1673Click To Get A Free Estimate
Sealed gray paver driveway with a single parked pickup and a palm in a front yard near a lake

A cleaner driveway that holds its color

Driveway Paver Sealing in St. Cloud, FL

Call (689) 329-1673 for a free estimate to seal your paver driveway.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 329-1673
Driveway sealing

Who seals paver driveways in St. Cloud, and how fast do they answer?

A local contractor seals paver driveways across St. Cloud, FL, and you hear back within 1 business day, usually long before it runs out. The estimate costs nothing, and the decision stays with you. To start, call (689) 329-1673.

A driveway takes more punishment than any other paved area at the house. Tires turn, brakes drip and the sun sits on it all afternoon. Western Interlock says turning and braking at the entry and exit wear a coat faster, which matches what you see on a driveway as two dull tire lanes. A contractor can look at yours, so send the free estimate form.

Call (689) 329-1673

Driveway wear

What does a St. Cloud driveway go through that a patio does not?

Weight, heat and drips

Mostly weight, heat and drips. A sealed driveway still gets tire rubber, oil and the occasional spill, and a bare one soaks them up. Baha Soft Wash says rust from irrigation, algae and oil stains all soak into unsealed pavers on its St. Cloud page. To talk about the stains on yours, call (689) 329-1673.

Oil and tire marks

Lurvey's says oil can penetrate concrete pavers, and that a general cleaner may leave a dark stain below the surface. Older or deeper stains may take more than one treatment. A coat laid over oil will not cover it. Show the contractor each spot when you send the free estimate form.

Sprinkler rust and lawn products

Toho Water Authority sets two watering days a week by house number, so a head that overshoots the lawn can hit the apron twice a week. The Osceola County fertilizer ordinance, described by UF/IFAS Extension, bars fertilizer during storm watches and heavy rain, which is also when granules wash onto a drive. Point out the rust streaks when you call (689) 329-1673.

Wide paver driveway apron with fresh joint sand swept in and tire lanes cleaned back to the original tan
Service area

Which neighborhoods can a driveway contractor reach from St. Cloud?

Where the estimates reach

Free driveway estimates reach St. Cloud and every place named below, across Osceola, Orange and Polk counties. Street not listed? Call (689) 329-1673 to check.

How it works

What is the driveway paver sealing process from start to finish?

The six stages in order

A driveway job follows six steps, and the oil and stain treatment is the one people skip. Ask any contractor to describe all six. To hear how they apply to your drive, call (689) 329-1673.

1. Measure and mark

The contractor measures the drive, marks oil spots, rocking pavers and old sealer, and asks which days your sprinklers run.

2. Treat the stains

Oil gets a stain treatment, not a quick rinse. Lurvey's describes a poultice-style product that draws set-in oil out as it dries.

3. Wash and rinse

A low-pressure wash lifts algae, dirt and tire residue. Unilock warns that wire brushes leave particles that rust.

4. Refill the joints

New sand goes in after the pavers dry. Western Interlock lists lost joint sand near high-wear spots as a sign of wear.

5. Dry out, then coat

Unilock asks for clear skies for 24 to 48 hours around the work, and a coat laid flat with a dry roller after the sprayer.

6. Cure and walk it

The contractor reviews the drive with you and gives the car, foot and furniture times for the product.

Contractor pointing out stained tire lanes to a homeowner standing at the foot of a paver driveway
Pricing

What does driveway paver sealing cost in St. Cloud?

What the published range says

Castle Clean and Seal lists Central Florida driveways at $1.50 to $2.50 per square foot, with typical drives running 600 to 1,200 square feet. Its own example puts a 1,200 square foot driveway closer to $1.50. One St. Cloud company quotes $1.50 to $3.50 per square foot for paver sealing generally. The table applies the Castle driveway range to three sizes. To price your drive, send the free estimate form.

What moves the price

Three things move the number: size, the shape of the surface and what is on it. Failed old sealer has to be stripped first, and Castle puts that at $500 to $1,000 or more. Heavy oil staining adds treatment time. To compare quotes you hold, call (689) 329-1673.

Driveway areaClean, sand and seal at $1.50 to $2.50With a failed coat stripped first
600 sq ft$900 to $1,500$1,400 to $2,500
900 sq ft$1,350 to $2,250$1,850 to $3,250
1,200 sq ft$1,800 to $3,000$2,300 to $4,000

The $1.50 to $2.50 driveway rate and the $500 to $1,000 stripping add-on come from Castle Clean and Seal's 2026 Central Florida price guide, which lists typical driveways at 600 to 1,200 square feet. Kennelly Paver and Restoration lists a standard pressure wash alone at $0.15 to $0.75 per square foot, and stripping with resealing at $3.50 to $5.00. A quote near $0.40 per square foot is called a red flag.

Get a Free Estimate

Timing

How often should a driveway be sealed in St. Cloud?

Traffic sets the schedule

The traffic decides. Western Interlock puts high-traffic driveways at every two to three years, moderate ones at three to four and low-use areas at four to five. Kennelly Paver and Restoration says a full-sun driveway may need attention every two years, and a St. Cloud company that quotes local jobs says every two to three. To set a schedule for yours, call (689) 329-1673.

A water test you can ask for

Western Interlock times how long water takes to soak in. Beading for five minutes or more means the coat is still working, soaking in within one to two minutes means sealing should be planned within six months, and instant soaking means it is urgent. Ask the contractor to run the test during the free look, and send the free estimate form.

Which finish suits a driveway, and does the color change?

Film-forming or penetrating

Film-forming sealers sit on top and often deepen color, Western Interlock says, while penetrating sealers soak in and typically last longer. Lurvey's notes that enhancing and gloss sealers can make differences between pavers more noticeable, and Unilock suggests a test patch before the whole drive. A wet look suits some homes and not others. Ask to see a sample when you call (689) 329-1673.

How long should the driveway stay empty after sealing?

Parking and foot traffic

Cars wait longest. Castle Clean and Seal says at least 48 hours for vehicles, 4 to 6 hours for feet and about 24 hours for furniture, with humid or shaded conditions adding time. Unilock asks for up to 48 hours of dry weather for the coat to cure. Plan to park off the drive for two nights, and call (689) 329-1673 if a trip or guests complicate the dates.

Gray paver driveway apron in late afternoon light with a hose reel and clean edges along a lawn

What about the sprinklers, the rain and the afternoon storms?

Planning around the weather

Rain and sprinklers are the main reasons a driveway job moves. Unilock asks for clear skies for 24 to 48 hours before and during the work and says automatic sprinklers should be off, because water can leave white marks or get trapped under the coat. Kennelly Paver and Restoration notes that Orlando gets over 50 inches of rain a year. Give the contractor a flexible window when you send the free estimate form.

Photos

What do sealed driveways look like around St. Cloud?

Wide sealed gray and tan paver driveway with homeowners beside a lakeside street on a driveway in St. Cloud
Family on lounge chairs by a sealed paver pool deck inside a screened lanai on a driveway in St. Cloud
Sealed herringbone paver walkway leading to an arched front door on a driveway in St. Cloud
Sealed paver patio with a dining table at golden hour beside a cypress-lined lake on a driveway in St. Cloud
Close view of sealed travertine pavers with clean joints on a driveway in St. Cloud
Shaded paver patio with one cleaned half beside a mossy half on a driveway in St. Cloud
Contractor running a surface cleaner over a brick paver driveway on a driveway in St. Cloud
Two contractors spraying and rolling sealer on a paver driveway on a driveway in St. Cloud

What questions should I ask before a driveway is sealed?

Method matters more than price

Paver companies publish their rates, so the useful questions are about method. Castle Clean and Seal says to ask for the sealer brand and data sheet and warns against no-name products. To put these to a contractor, call (689) 329-1673.

What happens to the oil stains?

Lurvey's says sealing over a stain will not hide it, so the quote should name the treatment.

Is stripping part of the price?

Castle lists it at $500 to $1,000 or more, so it should be a separate line.

Which product and why?

Water-based is the Florida standard per Castle, and brick uses water-based only per Kennelly.

Who is home during the work?

Baha Soft Wash says its crew does not need the owner home if the areas are reachable. Ask each contractor.

How are the sprinklers handled?

Share your house number so the job lands on a day the zones can be off.

What is the rain plan?

A new date should be named before the first day, since cars need 48 hours.

Questions

Frequently Asked Questions

How much to clean and seal pavers?

The published Central Florida range for the whole job is $1.50 to $3.00 per square foot, and Castle Clean and Seal puts driveways at $1.50 to $2.50. For a typical St. Cloud driveway of 600 to 1,200 square feet, that comes to roughly $900 to $3,000 across the range. Larger drives often land at the lower rate, so measure before you compare quotes.

How often do you seal pavers in Florida?

Every two to five years, and use sets the date. Western Interlock says high-traffic driveways come due every two to three years, moderate ones every three to four and low-traffic areas every four to five. Kennelly Paver and Restoration says a full-sun driveway may need attention every two years. Entry and exit points wear first.

Is it worth it to seal pavers?

For a driveway it often is, because the stains land there. Western Interlock says oil and leaf stains can become permanent once they soak into unsealed pavers, and a coat gives you time to clean a spill. The price of a coat comes back around every few years. Weigh that against how much staining and fading you already see.

How much does it cost to have your pavers sealed?

A free quote is the only way to get your own figure, and the published range is the place to start. Castle Clean and Seal says $1.50 to $3.00 per square foot is typical in Central Florida in 2026, while one St. Cloud company quotes $1.50 to $3.50. Stripping a failed coat adds $500 to $1,000 or more.

Is there a downside to sealing pavers?

The main one is timing. Lurvey's says sealing over a stain will not hide it and may make it harder to fix, so oil spots need treatment first. Unilock warns that hot pavers can stain or peel under a coat, and high gloss can be slippery. A contractor who tests a small area first avoids most of that.

Does a sealed driveway protect against oil stains?

It helps, but it does not make a driveway stain proof. Lurvey's says oil can soak into concrete pavers and that sealing over a stain will not remove it. Western Interlock says sealer protects against vehicle oil and leaf stains. Ask the contractor to treat existing spots before the coat goes on.

How long before I can park on a newly sealed driveway?

Castle Clean and Seal says to keep cars off for at least 48 hours, feet for 4 to 6 hours and furniture for about a day. Unilock asks for up to 48 hours of dry weather for the coat to cure. Plan to park at the curb or a neighbor's drive for two nights.

Can new pavers on my St. Cloud driveway be sealed right away?

Usually not. Unilock says to wait until efflorescence, the white haze of natural salts, is gone, typically two to three months and sometimes up to a year. Western Interlock suggests 30 to 60 days as a starting point. St. Cloud counted 21,347 housing units in 2020, according to Wikipedia, so plenty of pavers here are newer. Ask about your install date.

Want the driveway looked at this week?

Give a contractor your street and the rough size of the drive, and a reply comes within 1 business day, often sooner.

Call (689) 329-1673

Free, no obligation